* Material:  LiNiCoMnO2  5:2:3)

* Current collector (substrate): Aluminum foil (15 microns)

* Cathode material: Lithium Nickel Manganese Cobalt Oxide

* Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.  

* Single sides material density: 11.5 mg/cm2

* Compaction density: 3 g/cm3

* Active Material Weight: 5.4939g

* Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 

* Specific Capacity: 155 mAh/g (Area Capacity: 1.774 mAh/cm2) [0.2C, 4.2-2.7 V vs Li/Li+, Half Cell]

* Average Cycle Life: 500 Cycles @ 0.2C Charging/Discharging Rate [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]

Length: 241mm

Width: 200mm

Total Thickness: 60um +/- 3um
Foil Thickness: 15 um +/- 3um

Coating Thickness: 45um +/- 6um

Net Weight: 19.5g

Single side coated

Qty: 5 sheets/bag
Note: The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation.