Aluminum Foil Double Side Coated by LiNiCoAlO2
  • Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoAlO2

Size: 241 L x 200 W x 0.06T Thickness mm

Package: 5 sheets/bag

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Cobalt Aluminum Oxide (NCA811) on double sides and can be used as the cathode of Li-Ion battery

Specifications

  • Material:  LiNiCoAlO2（Ni:Co:Al = Ni:Co:Al=8.15:1.5:0.35)
  • Current collector (substrate): Aluminum foil (16 microns, area density of 4.22mg/cm2)
  • Coated Area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side.  
  • Double sides area density: 21 ± 0.40 mg/cm2
  • Compaction density: 3.4 ± 0.1 g/cm3
  • Coating Thickness: ~62 um
  • Total Thickness: ~78 um
  • Active Material Weight: 8.32 g
  • Active Material Proportion in Powder: 94% 
  • Specific Capacity: 190 mAh/g [0.1C, 3.0-4.3 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]

Note: The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation.

목록으로