Size: 241 L x 200 W x 0.05 T mm
Package: 5 sheets/bag
This electrode sheet is based on copper foil coated with graphite coating on a single side for Li-Ion battery application. The electrode has been rolling pressed with high compaction density.
Specifications
Current collector (substrate): Copper foil, 9 micron
Anode material: Composite Graphite
Binder: SBR+CMC (2.5% SBR, 1.8% CMC), conductive carbon” Super P, 2.5%
Single-side material density: 6.3 mg/cm2
Compaction density: 1.2 g/cm3
Active Material Proportion in Powder: 93.2%
Length: 241mm, Width: 200mm (coating width of 175 mm, left and right-hand side 12.5 mm without coating)
Total Thickness: 50 um (single-side coated)
Foil Thickness: 9 um
Specific Capacity: 330 mAh/g {Area Capacity: 1.903 mAh/cm2}
Single side coated
Warning: Please dry in vacuum oven before using and store it inside the glovebox after opening the package.
The recommended temperature and time can be 80-120 °C for 6-12h.
