Size: 241mm L x 200mm W x 0.14mm T
Package: 5 sheets/bag
This electrode sheet is based on Aluminum foil coated by lithium ferrous phosphate. Double side coating and is used as the cathode of Li-Ion battery
Specifications
* Current collector (substrate): Aluminum foil (16 microns)
* Cathode material: lithium ferrous phosphate (coated by carbon)
* Length: 241mm, Width: 175mm.
The edge width of blank area is 12.5 mm for each side.
* Total Thickness: 124-164 um (after hot calendaring)
* Double Side Coating Area Density: 27.0±0.4 mg/cm2
* Compaction Density of Coating: 2.3±0.1g/cm3
* Coating thickness: 117.4 um
* Total thickness: ~133.4 um
* Active Material Weight: 10.86 g
* Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
Specific Capacity: 150 mAh/g (Area Capacity: 3.864 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
* Charging and Discharging Curve for the First Cycle
Rate Testing
Cycling Test
Note: The electrode sheet shall be stirred in vacuum box, vacuum oven or glove box to avoid degradation