Size: LFP, 241mm L x 200mm W x 84um Thickness
Package: 5 sheets/bag
This electrode sheet is based on Aluminum foil coated by lithium iron phosphate (LiFePO4, LFP) in single side and is used as the cathode of Li-Ion battery
Specifications
* Current collector (substrate): Aluminum foil (16 microns)
* Cathode material: lithium ferrous phosphate (coated by carbon)
* Length: 241mm, Width: 175mm ( The edge width of blank area is 12.5 mm for each side)
* Single Side Coating Area Density: 13.5±0.2 mg/cm2
* Compaction Density of Coating: 2.0±0.1g/cm3
* Current Collector Area Density: 4.22 mg/cm2
* Coating thickness: ~68 um
* Total Thickness: ~84 um (after hot calendaring)
* Active Material Weight: 5.43 g
* Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
* Specific Capacity: 150 mAh/g (Area Capacity: 1.932 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
Charging and Discharging Curve for the First Cycle
Rate Testing
Cycling Test
Note: Please vacuum heated dry (100oC) before assembling the battery