NCM111 Aluminum Foil Double Side Coated by LiNiCoMnO2
  • Li-Ion Battery Cathode - Aluminum Foil Double Side Coated by LiNiCoMnO2 (Ni:Co:Mn=1:1:1, NCM111)

Size: 241mm L x 200mm W x 0.1mm T

Package: 5 sheets/bag

 

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (NCM111) on a double side and is used as
the cathode of Li-Ion battery

Specifications

  • Material:  LiNiCoMnO2 （1:1:1)
  • Current collector (substrate): Aluminum foil (15 microns)
  • Cathode material: Lithium Nickel Manganese Cobalt Oxide
  • Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.
  • Double sides material density: 26 ± 0.4 mg/cm2
  • Compaction Density: 3.4 ± 0.1 g/cm3
  • Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 
  • Specific Capacity: 150 mAh/g [0.1C, 4.25-2.8 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]

Note: The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation

목록으로