Specifications
| Name | 18650 Cylinder Cell Case with Anti-Explosive Cap and Insulation O-ring |
|---|---|
| Cap | Cap with Built-in PTC Thermistor for overcurrent protection |
| PTC | PTC resistance: 12 - 15 mΩ Non-operating current: 3 A Operating current: 6 A Operating current at 10 A < 8 seconds Maximum Voltage: 15 V Maximum Current: 40 A |
| Dimensions (Dia x Height) | Case: 18mm(OD) x 17.5mm(ID) x 67mm(H) Top Cap: 17.5mm(D) x 4.05mm(H) Top Insulator: 12.5mm(D) x 0.19mm(H) Bottom Insulator: 12.5mm(D) x 0.19mm(H) |
| Materials | Case and cap are made of Nickel plated A3 steel Sealing spacers are made of nylon The insulating gasket is made of PET |
| Weight | 9.50 g/pcs |
| Note | Safety valve's open pressure: 2.5MPa (the cap valve will open to release interior high pressure -- if over 2.5MPa -- to ensure the can does not explode) 18650 case's grooving and sealing machine is available upon request |
Application
To seal the cylinder cell, you should firstly groove it by MR-GC650 and then crimp it by MR-CF650
Options