Model: MR-ZY65
Product Introduction
Features:
* One machine includes electrolyte filling and diffusion functions;
* High measurement accuracy and repeatability;
* Multi-station with high efficiency, accurate precision, convenient and reliable operation.
* Filling electrolyte after vacuuming, high efficiency, accurate accuracy, convenient and reliable operation;
*Injection accuracy±0.5%, injection volume 0.2 ml ~ 200 ml;
*The entrance and exit are connected by chemical resistant hoses;
*Can be operated in a glove box or dry room;
*The appearance is exquisite and beautiful, and the performance is stable;
*PLC, touch screen operation, flexible parameters, high automation program;
Equipment Main Configuration
| Model | MR-ZY65 Suitable for lithium battery products, cylindrical or pouch cell |
|---|---|
| Function | Injection and Diffusion |
| Cylindrical Range | Φ60, H100mm or less, according to the 18650 calculation standard with 4 stations, 4 notes at a time |
| Warranty | One year limited warranty with lifetime support |
| Range of Capacity | 0.2ml~200ml |
| Core Liquid Injection | 0.2g~200g |
| Injection Accuracy | ±0.5% |
| Exhalation Velocity | 6ml/s adjustable |
| In and Out Pipe | The liquid inlet pipe 6mm |
| Adjustable Stroke | Maximum X-axis stroke 0~80mm (center) |
| Material | Manufacture of stainless Steel 304 and 316 corrosion-resistant material in key parts |
| External Dimension | L510mm×W400mm×H650mm |
| Power Supply | AC220V/50Hz/0.5KW |
| Weight | 90kg |
Filling Workflow
*Put the product into the vacuum chamber;
*Press the start switch, press down on the transparent sealed upper cavity, so that the battery is in a sealed vacuum cavity;
* Vacuum, after reaching the vacuum degree and the set time, the liquid will be injected automatically. After the filling of one product, the hand-operated worktable will switch to another product to inject the liquid, multi-function analogy.
*Then the system will automatically degas still;
*After degassing still, take out the product to complete.
Remarks: The vacuuming time and degassing time can be set according to the situation.
Main Components of Equipment
*Cylinder and solenoid valve, vacuum components: SMC/Taiwan Airtac
*Guide slider: Taiwan Shangyin/Intime
*PLC: Display and control
*Touch screen: display control
*Analog vacuum gauge: Panasonic
*Motor: Lei Sai
Environmental requirements
*Ambient temperature: determined by the customer’s factory environment;
*Power supply: 220V, 50HZ, voltage fluctuation range: +10%～-10%;
*Compressed air: After drying, filtering and stabilizing: the outlet pressure is greater than 4.0kg/cm2; if it is placed in the glove box, the compressed gas used is the same as that in the glove box;
*Vacuum source: vacuum pump 2 liters/sec, above -98KPa, or pipeline vacuum (above -98KPa);
