032-351-3303
젤리롤 핫 프레스 장비
  • Pouch Cell Hot Press Shaping Machine For Battery Core After Stacking MR-RY200

Model: MR-RY200

MR-RY200 Hot press machine is mainly used for battery cells hot press shaping after winding/stacking process, easy for battery core into the pouch or shell. Using the hot press shaping machine after battery winding/stacking on the template by pressure and heat to reduce batteries thickness with finalize design, reducing the battery core short circuit rate and ensure the consistency of the thickness of the finished batteries.

Features：

  • Upper and lower pressing die temperature can be controlled independently.
  • Heating temperature is adjustable from room temperature to 250℃ and digital display.
  • Pressing pressure can be adjusted.
  • Heating press time can be set.
  • The heating pressing die is made of copper with good heating conduction.
  • IR sensor and protection cover included for safety protection.

Specifications

ModelHot Press Machine MR-RY200
Source VoltageAC110V-240V, 50/60HZ
Power2000W
WarrantyOne year limited warranty with lifetime support
StructureThe LCD display shows Temperature
Using light curtain protection device, guarantee security
With abnormal temperature alarm function
Hot-pressing time, temperature, pressure can be adjusted
Use automatic and semi-automatic control, easy to operate
Air source0.5-0.8MPa
Hot press area200*200mm
Heating TEMRT-250℃, adjustable
TEM accuracy±2℃
Pressure1T adjustable
Dimension(L*W*H)350*320*550mm
WeightAbout 90kg
목록으로