파우치 파이널 실링 장비
  • Pouch Cell Final Vacuum Sealing Machine With Auto Piercing Function

Model: MR-BFZ200

MR-BFZ200 vacuum sealer is used for pouch cell final vacuum sealing after electrolyte injection and cell formation, it is with auto piercing function to de-gassing the cell and do a secondary sealing under vacuum condition. It is touch screen operation high automation.

Features:

  • With piercing needle, piercing function can be completed automatically.
  • Sealing blade is made from copper with good heat conduction.
  • Upper and lower sealing blade sealing pressure can be adjusted.
  • Upper and lower sealing blade temperature be controlled separated and settable, digital display by thermostat.
  • The lid can go down only by pressing the 2 start buttons at the same time to avoid hands get injured.
  • Touch screen operation, high automation.
  • Sealing time can be set.
  • Through perspective window to observe it during working.
  • The lid will open automatically when it finished sealing.

Specifications:

ModelPouch Cell Final Sealing Machine MR-BFZ200
Sealing head temperatureRT-250℃,adjustable
Temperature control precision±1.5℃
Heat sealing pressure0-7kg/cm2,adjustable
Heat sealing time0-99 second,adjustable
Sealing width5mm,adjustable
Vacuum degree-90Kpa ~ 0 adjustable (vacuum pump optional)
Voltage220V/50Hz
Power300W heat pipe, heating when the power consumption of about 0.6KW
Compressed air source0.5-0.7Mpa
SizeL500mm*W500mm*H700mm
Head parallelismwith triple carbonless paper, head pressure at 0.6MPa, the temperature at 200 ℃ when the seal out of the seal
Air consumptionabout 0.2L compressed gas / each time
Pneumatic working speed≥ 180 times / h
Dimension515mm * 350mm * 505mm
Weight56kg
목록으로